Front Brake Caliper Identification help !

-

motobro

Well-Known Member
Joined
May 12, 2013
Messages
180
Reaction score
5
Location
california
Hi,
Trying to figure out what year and model car these calipers are off of.
The were mounted on a 73 and up v8 kmember in a 69 dart.
10.98 rotor
I was told they were from a 74 duster, but I dont know where to go to reference the part numbers.
If I am to run these, I have to rebuild them as they have been sitting for 12 years outside on the car with the hoses open to the air.
Considering going to the 11.75 set up, Do you need new calipers when you do that or just the adapters ?
Anyone know what these are off of ?
 

Attachments

  • caliper 2.jpg
    35.8 KB · Views: 232
In looking in my " Hot Rodders do it yourself guide to:
Chrysler Performance Upgrades
The section on brakes says any single piston sliding caliper 76 thru 81 should work.
I think I will do what doc diff suggests and get remanned 78 cordoba calipers , the 11.75 rotors and the adapters and Im good !
Anybody done this ?
 
-
Back
Top