front brake shields

-
Status
Not open for further replies.
mtandrews

mtandrews

beware the Ides of March
FABO Gold Member
Joined
Jun 2, 2010
Messages
16,949
Reaction score
2,614
Location
Wilson County, Texas
Rating - 100%
1   0   0
Contact seller
hey all, I swapped my front disc from the 10.87 rotors to the 11.75 rotors on my Duster and didn't think about the friggin' dust shields! Anybody got a pair to 78220?
 
I don't have any dust shields, but you may want to check your wheel clearance with those new bigger discs. Some of the 14" wheels won't clear those........

I'm sure someone will have the shields for you. Good Luck
 
These larger rotors typically come from Cordoba's or "M"/"J" bodies. On Cordoba's, regardless or rotor size, they all use the same dust shield. With the small rotors the dust shield extends beyond the rotor about a quarter inch. With the bigger rotors the rotor is beyond the dustshield by a slightly less amount. "C" bodies had what could be called properly sized dust shields for these larger rotors but they wont easily bolt onto the typical "A" of "F" spindle most folks use. Using the standard dust shields with the larger rotors has never been a problem in the twenty or so years I used that combination.
 
Status
Not open for further replies.
-

Back
Top