In my shop manual (64bdodge dart), for front BENCH seats, it shows that the center seat belt mounts are each on the opposite side of the center tunnel and cross (the driver's inner seat belt is mounter on the far right hand side of the tunnel). Do you think this is the same for BUCKET seats? As mine currently sit, they are on the closest side of the tunnel and do not cross. THANKS!
front bucket seat belts...
- Thread starter redrag64
- Start date
-
FISHBREATH
Well-Known Member
- Joined
- May 21, 2008
- Messages
- 21,384
- Reaction score
- 73
My 1968 shop manual shows this:
Bucket seats with console - belts are mounted on same side of the tunnel as the seats.
Bucket seats w/o console - belts are mounted on opposite sides of the tunnel, crossing over it.
Bucket seats with console - belts are mounted on same side of the tunnel as the seats.
Bucket seats w/o console - belts are mounted on opposite sides of the tunnel, crossing over it.
Apparently they covered the topic in more detail in your 68 manual. I do not have a console, so I think I'll switch to a "cross over" set-up. THANKS!
-
