Front flip out window

[synchro66]

Just need some advice on removing the front flipper window frame/glass. Can it be removed separately, without the windup glass section and leaving the top door weather strips in place? If so any tips on snags to be wary of TIA

 

[cudascott]

It would help if we knew what car or truck your working on.

 

[Dana67Dart]

How to Restore a Mopar A-Body Door Window Assembly: Part 1

This is specific to a year but will give you some insights.

I would say no, at least on my 67 Dart, you have to put the vent frame in with the drivers glass and at an odd angle that I suspect would interfere with the drivers glass if the drivers glass were still in the door frame.

 

[synchro66]

It would help if we knew what car or truck your working on.

73 Valiant Charger ( Australian) A body ...most parts fit as per Dodge Dart

 

[cudascott]

The vent window and side glass go in as an assembly.

 

[dadsbee]

Some days you get lucky and the last guy in there didn't put the roll pin back in the pivot shaft.

 

[Dana67Dart]

Post some photos of your car and the vent window

 

[synchro66]

Post some photos of your car and the vent window

 

[synchro66]

that’s a pic of a spare I have which is out of the car? The reason for my original question is that I need to instal the rubber height stoppers at the top and I’m not sure whether they can be installed with the front quarter in situation or whether it needs to be removed first.