Front Spring Hanger Measurement

[DusTed74]

I'm in the process of installing my spring relocation kit in my Demon. But I do not have the old front spring hangers to use for line up. Does anyone know the distance from the mounting face to the bolt hole?

Thanks in advance...................Ted

 

[72ScampTramp]

My experience from this is to get a set. so much easier. What I did was clamp up the spring hangers and marked my holes. Had them drilled then put the boxes back in used a long metal rod and put it between all 4 mounts. And adjusted the boxes till they were square and the rod moved pretty freely between all 4 mounts. Then measured off the torsion bar mount for assurance.