73SwingerBuild
Well-Known Member
I ended up installing tubular upper control arms on my Swinger after rebuilding the ones I had, and I haven't had any issues, so I figured I'd list these for sale.
They both came off my '73 Swinger. I sanded them down, sprayed some rust-converter primer on them, and shot a single coat of semi-flat black. I was going to shoot them again once they were on the car but never got around to it. I installed new Moog ball joints (large ball joints, for the disc brake conversion on earlier cars) and UCA new bushings. The ball joints were screwed in, not pressed in, and they snugged up nice. You can tack weld them in if you want, but that's up to the buyer. They have some grease in them, but you pretty much just need to bolt them in and grease them and you'll be set to go.
Asking $150 for the set, plus shipping from North Smithfield, RI (02896).
Thanks for looking.
-Mike
They both came off my '73 Swinger. I sanded them down, sprayed some rust-converter primer on them, and shot a single coat of semi-flat black. I was going to shoot them again once they were on the car but never got around to it. I installed new Moog ball joints (large ball joints, for the disc brake conversion on earlier cars) and UCA new bushings. The ball joints were screwed in, not pressed in, and they snugged up nice. You can tack weld them in if you want, but that's up to the buyer. They have some grease in them, but you pretty much just need to bolt them in and grease them and you'll be set to go.
Asking $150 for the set, plus shipping from North Smithfield, RI (02896).
Thanks for looking.
-Mike
