fwiw: for worn out gasket that left a gap for fumes/fuel sloshing out:
Used Hillman rubber washer from Lowe's 1/2" X 2" X 1/8".
Cut out inside diameter so washer was about 1/4" wide.
Install carefully behind the existing gasket in the cap, prying up the old one and pushing in the new rubber washer behind it all around.
Made a good seal.
View attachment 1715008917
Used Hillman rubber washer from Lowe's 1/2" X 2" X 1/8".
Cut out inside diameter so washer was about 1/4" wide.
Install carefully behind the existing gasket in the cap, prying up the old one and pushing in the new rubber washer behind it all around.
Made a good seal.
View attachment 1715008917