[Found!] Fuel fitting 5/8-20 to 5/16 flare

[4spdragtop]

Hi all, looking for 2 of these, looks like Walker has them? Anyone got them in there stash? #90-42
Thanks
Steve

Carter Carburetor #4bbl-tq - Kit and Parts

 

[Mr. Sinister]

I MIGHT
I will have a look when I get home

 

[QWKSLVR]

I have some will have to confirm the sizes. I'll check and let you know tonight. Bobby

 

[QWKSLVR]

Just checked and they are 3/8 sorry. Bobby

 

[4spdragtop]

I figured these would be fairly "common" as there is quite a few out there running steel lines.

 

[Ronjon]

Is this what you need.
Rochester Carter 5/8-20 Brass Fuel Inlet Fitting 5/16" Inverted Flare | eBay

 

[4spdragtop]

Yep thanks, I saw that one. Over $30 by the time I get it tho
..

Is this what you need.
Rochester Carter 5/8-20 Brass Fuel Inlet Fitting 5/16" Inverted Flare | eBay

 

[CFD244]

Hey Steve. I've got an old locked up AFB. Would that have the fitting you need?

Oh yeah, and that parts TQ that you sent me. Would that have the one that you are looking for?

EDIT: Both of these are what you are looking for. Free for the ride.

 

[4spdragtop]

Thanks Troy, trying to find the little pieces for this DQ is a pain in the arse.
BUT I may be on the right track.
Eddy #8090 goes from 5/8-20 male thread to 3/8 inverted flare. Then a reducer(FMSI# 3418) drops it from 3/8 inverted flare male threads to 5/16 female.
Maybe being picky here, but sure would be nice to have less connections.
Thanks all.

Hey Steve. I've got an old locked up AFB. Would that have the fitting you need?

Oh yeah, and that parts TQ that you sent me. Would that have the one that you are looking for?

EDIT: Both of these are what you are looking for. Free for the ride.

 

[CFD244]

Here's what I have Steve. Let me know if you want them. One was out of the AFB, and the other from a TQ.

 

[4spdragtop]

Thanks Troy! What size is the female side? 3/8 or 5/16?

Here's what I have Steve. Let me know if you want them. One was out of the AFB, and the other from a TQ.

View attachment 1716068290

 

[CFD244]

Looks like 5/16. I'll put a fitting in to confirm, but 99% sure they're 5/16.

 

[4spdragtop]

Thanks, no rush.

Looks like 5/16. I'll put a fitting in to confirm, but 99% sure they're 5/16.

 

[RustyRatRod]

This clearly says 5/8 20 x 5/16 flare.

Fitting

 

[CFD244]

Thanks, no rush.

Yup, 5/16. Let me know if you want them.

 

[4spdragtop]

Thanks Troy , lemme see if I have any carbs left around here with some.

Yup, 5/16. Let me know if you want them.

 

[CFD244]

Ok. They are in an addressed bubble envelope waiting to get dropped off. Let me know what you decide.