leblanc
member 2883
Yesterday I wrote about a fuel leak I had, I wonder if I should put my new filter before the fuel pump or not. I have a plastic filter which I amgoing to replace with a metal one and use hose clamps rather than spring clamps.
fuel leak
- Thread starter leblanc
- Start date
-
cudadriver
Well-Known Member
The small hose clamps and the metal filter are a safer bet. Good to hear. Use some new rubber lines too. Can't be too careful with fuel.
slantsixdan
=..=
The filter goes between the fuel pump and the carburetor, not between the fuel tank and the fuel pump. If you are smart, use fuel injection hose (stamped "SAE 30R9") rather than the old-type regular hose ("30R7") and compatible fuel-injection hose clamps. The EFI hose has much higher temperature, pressure, and alcohol resistance, and is therefore safer with today's fuels.
leblanc
member 2883
Sorry for the delay, but thanks guys for the useful info.
-
