Kikowillers
Well-Known Member
Hi guys
There was a thread open a few months ago where a member was asking if anybody had installed a retrosound radio in a Dart. Well, I finally installed mine and thought there could be some interest here.
Retrosound Model One
Retrosound speaker 6x9 dual voice cone mounted under the dash.
I ran a new wire assembly to the battery so the power is always on, didn't want to risk running 15A through the ignition switch. Also installed fuses at the battery as well, even though the radio comes with a fuse in its wiring.
The speaker is very shallow and gives lots of clearance under the dash. And the bracket system for the knobs works very well, I was able to match my dash openings perfectly.
Check out some images attached.
Cheers!
There was a thread open a few months ago where a member was asking if anybody had installed a retrosound radio in a Dart. Well, I finally installed mine and thought there could be some interest here.
Retrosound Model One
Retrosound speaker 6x9 dual voice cone mounted under the dash.
I ran a new wire assembly to the battery so the power is always on, didn't want to risk running 15A through the ignition switch. Also installed fuses at the battery as well, even though the radio comes with a fuse in its wiring.
The speaker is very shallow and gives lots of clearance under the dash. And the bracket system for the knobs works very well, I was able to match my dash openings perfectly.
Check out some images attached.
Cheers!