Gas Pedal

[340 demon 72]

Looking for a Gas pedal for my 72 Dodge Demon. Bracket and all please

 

[ssba]

I could dig one up. Be back with a picture in a few.

 

[340 demon 72]

I could dig one up. Be back with a picture in a few.

ok cool

 

[ssba]

Here's what I have. It appears they have two different
cable lengths to choose from.

 

[340 demon 72]

Here's what I have. It appears they have two different
cable lengths to choose from.

View attachment 1714940011

how do I know which one I need??

 

[340 demon 72]

its a 4 speed car so it might be the short pedal??

 

[340 demon 72]

how much for the small pedal one??

 

[ssba]

I have not forgot about you here. Trying to make sure you get one that fits correct. I found a few more also.

 

[ssba]

I have found the short pedal is correct for your 72.
The longer pedals are on earlier cars 68 to 70.

 

[340 demon 72]

I have found the short pedal is correct for your 72.
The longer pedals are on earlier cars 68 to 70.

ok how much?

 

[ssba]

Looking the shorter pedal assembly over close and noticed it has a broken mounting bolt. I could repair it before putting it in a box or you could find a different part if you prefer. If repairing the bolt is acceptable for you I could sell the part for 15.00+ shipping. I would need to know which engine you have to ensure the cable is the correct length also.

 

[340 demon 72]

Looking the shorter pedal assembly over close and noticed it has a broken mounting bolt. I could repair it before putting it in a box or you could find a different part if you prefer. If repairing the bolt is acceptable for you I could sell the part for 15.00+ shipping. I would need to know which engine you have to ensure the cable is the correct length also.

340 is the engine are you going to press out the stud and press a new one in??

 

[340 demon 72]

how much would shipping b to 53168

 

[ssba]

That or swap the pedal pad onto a problem free assembly. I have several.
Not sure on the shipping till I can take it up to the post office.

 

[340 demon 72]

That or swap the pedal pad onto a problem free assembly. I have several.
Not sure on the shipping till I can take it up to the post office.

other than the stub the assembly is problem free isn't it? I would prefer it b pressed out and another one pressed in

 

[ssba]

I will check into it, they may be welded in.
Back in a few.

 

[340 demon 72]

I will check into it, they may be welded in.
Back in a few.

ok

 

[ssba]

Studs are welded in. I'm afraid you will need to find
another assembly as I can't make an undetectable
repair. I could drill the stud out put I can't press a replacement out of another assembly without damaging it. You could put a bolt thru but it would not be factory exact. I only have the one short pedal assembly the rest I have are for older models.

 

[340 demon 72]

Studs are welded in. I'm afraid you will need to find
another assembly as I can't make an undetectable
repair. I could drill the stud out put I can't press a replacement out of another assembly without damaging it. You could put a bolt thru but it would not be factory exact. I only have the one short pedal assembly the rest I have are for older models.

ok so how much for it as is??

 

[ssba]

Let me get it boxed and a shipping price for you.
Shouldn't be much.