gliderider06 FABO Gold Member FABO Gold Member Joined Oct 21, 2011 Messages 2,480 Reaction score 1,699 Location Delaware Jun 15, 2014 #1 When a rear whines on decel, Is it generally from them being set up too close to the pinion gear? It is an 8-1/4 with a 3.55 suregrip.
When a rear whines on decel, Is it generally from them being set up too close to the pinion gear? It is an 8-1/4 with a 3.55 suregrip.
RustyRatRod I was born on a Monday. Not last Monday. FABO Gold Member Joined Jun 7, 2010 Messages 104,898 Reaction score 102,528 Location Georgia Jun 15, 2014 #2 Pinion gear depth incorrect. I cannot remember it whine on decel indicates too much or too little, but that's what it is.
Pinion gear depth incorrect. I cannot remember it whine on decel indicates too much or too little, but that's what it is.
Supershafts Well-Known Member Joined May 12, 2010 Messages 1,413 Reaction score 68 Location Long Island, N.Y. Jun 15, 2014 #3 Set up is wrong and pin may be in to far
hemi446 Well-Known Member Joined Aug 3, 2013 Messages 742 Reaction score 274 Location Ellicott City MD Jun 15, 2014 #4 If it has not just rebuilt or overhauled it sounds like the pinion bearings are worn or loose.
gliderider06 FABO Gold Member FABO Gold Member Joined Oct 21, 2011 Messages 2,480 Reaction score 1,699 Location Delaware Jun 16, 2014 #5 I just swapped out 2.71 for the 3.55. I have not set up an 8-1/4 before, but plenty of 8-3/4 with never a problem. This coast side whine had gotten me confused.
I just swapped out 2.71 for the 3.55. I have not set up an 8-1/4 before, but plenty of 8-3/4 with never a problem. This coast side whine had gotten me confused.