R Roadart FABO Gold Member FABO Gold Member Joined Jun 18, 2018 Messages 363 Reaction score 138 Location Escalon ca. Jul 29, 2019 #1 How do I remove the bezel around the glove box door? All screws are out,door is off,.Service manual shows a door with a lock,mine does not lock(no key slot). I don't want to break it by prying. Any ideas ??
How do I remove the bezel around the glove box door? All screws are out,door is off,.Service manual shows a door with a lock,mine does not lock(no key slot). I don't want to break it by prying. Any ideas ??
Dana67Dart The parts you don't add don't cause you no trouble FABO Gold Member Joined Jul 16, 2017 Messages 15,008 Reaction score 12,352 Location Northern Colorado Jul 29, 2019 #2 Don't know for sure but I think you have to remove the non locking tab ( where a key lock would be). There also might be some strip adhesive between bezel and metal door. Post a photo or two. Lastly what year, trim, car model?
Don't know for sure but I think you have to remove the non locking tab ( where a key lock would be). There also might be some strip adhesive between bezel and metal door. Post a photo or two. Lastly what year, trim, car model?
R Roadart FABO Gold Member FABO Gold Member Joined Jun 18, 2018 Messages 363 Reaction score 138 Location Escalon ca. Jul 29, 2019 #3 Yea,sorry a72 dart swinger. Here are three photos. hope this helps.
K kg340 Well-Known Member Joined Feb 2, 2005 Messages 148 Reaction score 23 Location Upstate N.Y. Aug 14, 2019 #4 Look in the "how to" section there's a write up. I just went through that myself.
R Roadart FABO Gold Member FABO Gold Member Joined Jun 18, 2018 Messages 363 Reaction score 138 Location Escalon ca. Aug 15, 2019 #5 Thank you ,i will look it up.