GTS Door Emblem Fasteners

-
Lord Sparky

Lord Sparky

Well-Known Member
Joined
Dec 2, 2019
Messages
1,013
Reaction score
956
Location
Carlsbad, California
You put the two fasteners in the door from the outside, then push the emblem pins into the holes (you don’t put the fasteners onto the pins from the inside of the door)?
 
Photos please

this is typically what I see for retainers. On later years I see a push in retainer that the posts push into.

I can not say for sure on the GTS badge but 67 GT and V8 and D O D G E letters they all use a nut like this

upload_2020-5-16_10-43-55.png


Also can't say I have ever seen a GTS emblem on the door, front fender in front of door yes
upload_2020-5-16_10-50-45.png
 
Last edited:
Dana67Dart said:
Photos please

this is typically what I see for retainers. On later years I see a push in retainer that the posts push into.

I can not say for sure on the GTS badge but 67 GT and V8 and D O D G E letters they all use a nut like this

View attachment 1715529287

Also can't say I have ever seen a GTS emblem on the door, front fender in front of door yes
View attachment 1715529295
Click to expand...
I should have said the interior of the door.
 
Got it, definitly can't help you there.

Is it in the door metal or the door panel
 
You are correct, they push into those sleeves which are tapered to hold the emblem in place. I presume you are talking about a 1969 Dart?
 
You must log in or register to reply here.
-

Back
Top