head gasket

[Greg Edsall]

I have stock stroke 30 over 340 with older trw2332 pistons. I just got a deal I couldn't turn down on a set of trick flows. Just wanting know what head gasket to use?

 

[-Boosted-]

I have stock stroke 30 over 340 with older trw2332 pistons. I just got a deal I couldn't turn down on a set of trick flows. Just wanting know what head gasket to use?

If the surface of the block will allow it, Cometic is what I would recommend. Trick Flow also sells head gaskets that are made for them by Cometic that are basically the same gaskets.

 

[Garrett Ellison]

Isn’t that the TRW domed piston?

 

[oldkimmer]

Isn’t that the TRW domed piston?

No, Their a copy of the 10.5 68-70 piston. Kim

 

[T56MaxTorq]

I run a felpro 1008 to 15 lbs of boost for thousands of miles

 

[mderoy340]

Those pistons should be above deck and trickflows are closed chamber. Measure the pistons comp height and add .040 for your headgasket thickness.

 

[moparstud440]

I'd go with cometic personally.