My goal is to build a very bad *** handling a body. I have owned many mopars all levels of hp but NONE that actually could take a turn. I purchased a one owner 70 dart and put it on the lift and removed ALL suspension. I have a 340 a833 ready to drop in. This is what i have ordered so far.
Hotchkis front sway bar
Hotchkis rear sway bar
Hotchkis leaf springs
billstein shocks
PST 1.03 torsion bars
New motor mounts
New trans mounts
I bought this disc brake kit. (i know some may have gone a different route however i liked how complete the kit was) [ame="http://www.ebay.com/itm/4-Wheel-Manual-Disc-Brake-Conversion-Kit-w-Brake-Lines-1960-1976-Mopar-A-Body-/290835035704?pt=Vintage_Car_Truck_Parts_Accessories&hash=item43b71e7638&vxp=mtr"]4 Wheel Manual Disc Brake Conversion Kit w Brake Lines 1960 1976 Mopar A Body | eBay[/ame]
Full stainless brake lines
8 3/4 with posi 3.55
What am i missing, i know i need tie rods, inner and outer and sleeves. I need the stabilizer bars (not sure if that is what they are called, the ones that go from the lower control arm to the k frame) and control arm bump stops.
Where can i buy the individual parts and is there brands that are more aimed to my needs than others.
Thanks for any and all input it is greatly appreciated.
Joe
Hotchkis front sway bar
Hotchkis rear sway bar
Hotchkis leaf springs
billstein shocks
PST 1.03 torsion bars
New motor mounts
New trans mounts
I bought this disc brake kit. (i know some may have gone a different route however i liked how complete the kit was) [ame="http://www.ebay.com/itm/4-Wheel-Manual-Disc-Brake-Conversion-Kit-w-Brake-Lines-1960-1976-Mopar-A-Body-/290835035704?pt=Vintage_Car_Truck_Parts_Accessories&hash=item43b71e7638&vxp=mtr"]4 Wheel Manual Disc Brake Conversion Kit w Brake Lines 1960 1976 Mopar A Body | eBay[/ame]
Full stainless brake lines
8 3/4 with posi 3.55
What am i missing, i know i need tie rods, inner and outer and sleeves. I need the stabilizer bars (not sure if that is what they are called, the ones that go from the lower control arm to the k frame) and control arm bump stops.
Where can i buy the individual parts and is there brands that are more aimed to my needs than others.
Thanks for any and all input it is greatly appreciated.
Joe
