Help getting the Cam bolts out

[dudeman]

Okeedokey. So I got most of the front suspension apart. Been reading teck and will take the upper ball joints out of the arms before taking them off the car. But, here's the question: I can't get the freakin cam bolts to come out of the A-arm! Any suggestions? There is probly some rust involved but they aren't budging for me.

 

[440valiant]

Have you tried heating them with a torch? Or letting them soak in WD-40 overnight? Or if it still doesn't come you could just cut them and get new ones later.

 

[daredevil]

soak em down with pb blaster and assuming the nuts are off you can drive them out with a punch.

 

[440valiant]

If I remember right there is still weight on the thing, maybe try blocking it to take the pressure off.