Help me ID this Fuel Filler Neck...

[694spd]

The tube is about 28" long.
Based on the remaining foam gasket. It was mounted from the inside.
There is no vent tube.
The mounting flange has three screw holes.

 

[TF360]

Looks like it's off a 73-74 A-body to me

 

[Dana67Dart]

No vent tube so not 69 and older.

Mounts from the inside of the trunk and has 3 holes. At some point the inlet mounts from the outside and at some point it went to 3 screws.


This is 69 to 67 Dart for reference

Here is one that it is NOT...

Here is a possibility
3 holes OR 4

No vent tube

 

[Oldmanmopar]

You have a 1971 Duster Demon tube. One year only except california 70. yours is a three screw , mounted from the inside with no small vent tube. uses 71 cap only

A three screw mounted on inside is with small vent tube is 70 duster only. uses 67-70 cap

All Darts and Scamps have 4 screws

 

[694spd]

You have a 1971 Duster Demon tube. One year only except california 70. yours is a three screw , mounted from the inside with no small vent tube. uses 71 cap only

A three screw mounted on inside is with small vent tube is 70 duster only. uses 67-70 cap

All Darts and Scamps have 4 screws

Thanks...
I was counting on you to know.