Help measurements.

[1973dartswinger]

Hey guys,
My cars currently at the shop but I need to order some stuff and I need some measurements, hopefully y'all can help me out.
I need measurements for Beauty rings, lug nuts and push through center caps.

More detailed, its a stock 1973 dart swinger, with stock rims. Big bolt patern with stock front disc.

I need the thread of the wheel studs.
I need for the beauty rings how deep the rim goes in, and how big the rim is, is it 14" or 15"
I also need For a push through center cap wheel hub cover i need the size of the hole itll go through, either 2.675 inches or 2.95 inches.

Thanks for your help, if this is confusing lt eme know and ill see what i can clarify.
-Mike

 

[tobysoldblue]

if its big bolt pattern,it has 1/2 inch lugs,small bolt wheels take 7/16 lugs stock.It also had 14 inch rims from the factory

 

[1973dartswinger]

will these fit??

http://www.lakeshorewheelandtire.co...749&prevaction=category&previd=40&prevstart=0

and then which one of these will fit??

http://www.lakeshorewheelandtire.co...4&prevaction=category&previd=24&prevstart=112

or

http://www.lakeshorewheelandtire.co...5&prevaction=category&previd=24&prevstart=112

then i plan on getting these, should look pretty bad ***:

http://www.lakeshorewheelandtire.co...200&prevaction=category&previd=22&prevstart=0