Help need steering coupler !

[jomoper]

Any body got the U-joint piece for a MANUAL steering box ?
Converted My dart over to a manual box and column but it's missing the coupler on the end and the one off my old power steering column is too small it will not fit on the splined shaft of the steering box!

 

[68dodge]

Get one from Mancini Racing. They caring the right one for this swap.

 

[jomoper]

I have the power to manual adapter if that's what your refering to.
Trouble is it puts the stock connector too far back where it contacts the header tube . So I swapped the steering shaft with a longer one from a manual steering car that's when I discovered that the P/S coupler would not engage the Manual steering box shaft.
Flaming river makes a coupler but it's $$$
Anybody else got any ideas ?

 

[dusterdood]

I've got the center out of a steering column that I think was manual. Measure the length of the power coupler, and if I've got the other style one, you can have it for $5 plus shipping.
Mike

 

[Dorian]

I bought mine from the Chrysler dealership here in town. I think it was $75.00

 

[jomoper]

dusterdood

I've got the center out of a steering column that I think was manual. Measure the length of the power coupler, and if I've got the other style one, you can have it for $5 plus shipping.
Mike

Thanks Mike !
If it'll work I'll take it.:cheers:
So the power coupler minus the snap on piece that holds the seal measures 3"
tall the bore (which is obviously too small is 5/8")
The end of the adaptor that didn't work has a bore of aprox 3/4 " hard to measure because of the splines.
So if the one you got is about 3" tall with a 3/4" bore it should work .
Let me know I really appreciate it ! ,Joe