75gold.uster
Well-Known Member
i need someone to help me out with installing a new head gasket i have taken everything apart and organized all differnt bolts in labelled baggies . i had a gasket when i put it in place me and my dad gently put the head back on top, but my problem is the push rods wouldnt slide back into place, so we took the head back off then put the rods back into the little pockets, we lowered the head slowly trying to line up the rods with the holes but it was much too hard. does anyone have suggestions on what to do? or if im doing something wrong any question or comment would help i dont know too much about cars im 16 years old and learning thanks!