Help to identify 9 loose items from '65 Barracuda?

[dibbons]

Please help identify the items labeled A thru I that were found inside a 1965 Barracuda Formula S at time of purchase. The paint stick (about 12 inches long) is shown for size reference:

A some kind of rectangular rubber gasket?
B two pot metal brackets
C one pot metal piece with two holes, seems to be broken off at both ends
D one gold plastic cover
E two gold plastic trims
F three shiny metal/polished pieces
G two gold painted metal trim
H one gold painted rubber gasket?
I one gold metal trim piece, might be one of two

Thank you.

 

[Big_John]

B goes on the platform in the rear on the corners
E are your A pillar trim. Be careful, they are fragile.
F is the side trim from the rear platform
G is the trim above the doors

I should know what "I" is... Let me think on that one.

Edit: Corrected myself on "F"

 

[Big_John]

B (not my pic)

 

[Big_John]

I is the vertical trim around the rear window (not my pics)

 

[Big_John]

Corrected myself on "F"

This is the trim around the platform (not my pic)

 

[Big_John]

Another pic of "I" from your own car. LOL!

and it shows where "G" is missing.

 

[Big_John]

"C" looks like a broken license plate frame.

 

[dibbons]

I must have some spare/extra parts then. Update: No spare parts, regarding the "I" piece, one was installed on the car, the other was in the box of loose parts.

 

[Dana67Dart]

"C" looks like the remains of a license plate frame. (potmetal)

 

[dibbons]

Must be a license plate frame fragment.

My guess for "H" is going to be a "cover" on top of the dash along the inside-bottom of the windshield black rubber gasket (don't really see the need to cover up the gasket).

"A" and "D" remain a mystery so far.

 

[Big_John]

Do a pic of "D" from another angle.

 

[dibbons]

E are your A pillar trim. Be careful, they are fragile.

No kidding, I just noticed one of them has a corner missing.

 

[dibbons]

Additional "D" fotos:

 

[Big_John]

No kidding, I just noticed one of them has a corner missing.

You can build up the missing piece with this stuff. I've used it on a couple projects and have happy with the results.
PLASTEX, PLASTIC REPAIR KITS, FIX CRACKS, REPAIR PLASTIC

 

[Big_John]

Additional "D" fotos:

View attachment 1715151504

View attachment 1715151505

View attachment 1715151507

That goes over the trunk latch.

 

[Big_John]

Not my pic.

 

[dibbons]

That makes sense. By the way, your "not my pic" foto in post #16 did not load, just a note that photobucket is holding it hostage.

 

[Big_John]

That makes sense. By the way, your "not my pic" foto in post #16 did not load, just a note that photobucket is holding it hostage.

Fixed it!

 

[BarracudaDave]

That was a fun game! C really fooled me. Good catch Dana67Dart!
Does anyone make reproductions of D or H. Those trunk lock covers (D) get so brittle they crumble in your hand.
I have never heard of anyone ever mentioning H. I have one that is in very poor condition. If no one is reproducing it, what to other people use in its place?

Thanks!

 

[dibbons]

I have had a commercial restaurant stainless sink fabricator nearby make me a glove box liner, package shelf, and rear seat divider from food grade stainless steel. I will be asking them in the future to attempt to fabricate some of these parts that disintegrate after 50 years. Might work out, might not.