Help with stock 69 340 pulleys

[ricks70dart]

Bought a 69 Dart in pieces.Trying to find the correct pulleys for the alt,power steering,water pump and it's a AC car we have the ac pump and bracket sure it's correct but not sure on the crank pulley and alt and power steering ,water pump.It has a cast iron water pump.Would like to see a picture of the correct set up and then we can try to figure this out. Heard. 318 could be the same.Thanks in advance

 

[Sedanman]

Any 69 and older set up will work.

 

[340doc]

I got a 69 engine covered up at home with everything on it but the AC compressor, I took it off for storage. I'll snap a pic after work if no one beats me to it.

 

[Sedanman]

I have the a/c with PS crank pulley but doc seems to have all that you need.

 

[ricks70dart]

I got a 69 engine covered up at home with everything on it but the AC compressor, I took it off for storage. I'll snap a pic after work if no one beats me to it.

Great thanks

 

[340doc]

Here's the best pics I could get. The alt rides on the water pump Lilly and the rear groove on the crank pulley. The PS rides on the second groove of the crank pulley. The AC rides on the front groove of the crank pulley. Good luck, hope this helps.

 

[ricks70dart]

Great thanks

Thanks for the photos helped us a lot .could I ask one other thing would like to know the width of the water pump pulley thanks again. Rick

 

[340doc]

I'll get that

 

[ricks70dart]

I'll get that

I noticed the timing marks on the cover are on the drive side there on the pass side on this motor we have. Was told this was correct with the cast iron water pump?