no1newb
Well-Known Member
i hooked up my MSD ignition box, and when i go to connect the negative battery cable the starter turns without the key even in the ignition, what happed.
Help!
- Thread starter no1newb
- Start date
-
dustermaniac
Senior Member
Maybe you have a wire crossed? or check if any of the connectors/wires are touching and when you power up the electrical system it may be causing the starter to engage. I know that if the wires on my starter relay touch each other in any way that the starter will engage as soon as power is attached to the electrical system.
no1newb
Well-Known Member
ok, i found my problem, but now it doesnt seem to be delivering any spark,
no1newb
Well-Known Member
found my problem, the way i had the distributor cables spliced (the ones that came with the msd kit) didnt go through the wire skin so i just cut the wires off my orange box and put a quick connect thing on it, so its now running fine, and i didnt even need to pump the gas to get it started!
MSD happened. Try mopar stuff. It works. Sorry. I'm a bit biased. Glad you figured it out, though.
goldfish65
Well-Known Member
Way to go newb, you're doing great, keep up the good work.
-
