Hood Pins on a '67 Barracuda

[Tony Fields]

Does anyone have a pic or dimensions showing where the pin is
mounted to the rad. support.

Thanks

 

[RangerRick]

I have mine located approx. 9" in from each edge of the fender on the radiator support bracket. you could go less so it would be closer to the edges, if you preferred. I have a lift off hood, but used the same pins when I had a glass hinged hood.

 

[Tony Fields]

I have mine located approx. 9" in from each edge of the fender on the radiator support bracket. you could go less so it would be closer to the edges, if you preferred. I have a lift off hood, but used the same pins when I had a glass hinged hood.

Thanks Rick!

Would you have a pic with the hood open?

 

[1968FormulaS340]

They were not factory installed so just put them where they look nice.

 

[Tony Fields]

They were not factory installed so just put them where they look nice.

I know, just trying to find a starting point on mounting the studs.

 

[SWETPT]

Hope this helps. Pete

 

[Tony Fields]

Hope this helps. Pete

Thanks Pete!

That's what I was looking for.

Tony

 

[RangerRick]

here are a couple pics...the foam in the center is my prop rod that was used when it was a hinged hood....

 

[Tony Fields]

Thanks guys!

I have a plan now.

 

[AdamR]

I dont have any pictures but I removed the fender bolt and put the pin there,

 

[Tony Fields]

Got them on guys.

Thanks!

 

[Renegade]

Cool!