Horse Power And 1/4 Mile Time Guestimates

[73dart360]

I Am Nearing The End Stages Of My 408 Stroker Build Going Into A 1968 Valiant 100 2700 Lbs Heres The Combo Can You Guys Give Me Some Good Guestimates On Hp And 1/4 Mile Times
1971 360 Block Bored .30 Over Keith Black Forged Flat Top 11:1 Comp
Mopar Performance Forged Crank,eagle H Beam Rods,arp Main Studs,keith Black Forged Flat Top Pistons,w2 Race Heads Ported And Polished By Indy, Valves 2.080x1.600 Flow#s (indy Single Plane Intake Ported And Polished To Match) (holley Electric Fuel Pump 140gph)-tti 1 7/8 Headers-charlies 8 Qt Oil Pan W/windage Tray
.100 68.7 72.5
.200 131.5 119.7
.300 189.8 162.2
.400 246.3 192.2
.500 290.6 211.
.600 315.9 221.7
.650 310.5 227.4
Comp Cam Solid Flat Tappet Intake-271 Exhaust-279
Intake-630 Exhaust-652 Lobe 110
Pro Systems 950 Cfm (8.75 With 391 Gear ) Caltracs-mt/drag Radials - 4000 Stall Cheetah Manual Valve Body

 

[crackedback]

I'm going to guess right at 590-600hp.

2700 it should run real low 10's and maybe into the nines if you got a better convertor and gear selection. It will MPH like a **** compared to ET with the way it's set up gear wise.

 

[73dart360]

Crackedback- What Would You Go With Gears And Converter

 

[dartman340ta]

mopar chassis book there's a formula for gear ratio's . plus there's alot of info for 30$. one of the best investment 's i've ever made takes alot of the guess work out of the picture