Horsepower Estimate

[72ScampTramp]

Alright guys combo set...

.030 440
Lunati 60341 Solid cam (see cam card)
Real close to 9.7:1 compression ICON forged Pistons
Mildly Ported 452 heads Flow sheet attached
Dual carb Weiand Tunnel Ram 2x600 Holley carbs
Pro Parts 2" headers
Stock Stroke crank and rods

 

[RustyRatRod]

I will get on it tonight and let you know.

 

[440dartsport]

Am I missing something? I can't see any numbers on the cam card.

 

[72ScampTramp]

Wow I didn't notice that either

 

[sr71mopar]

Google says 272/280 Duration, .546/.566 Lift, 110/106 LSA

 

[demon seed]

I'll go 535 if you can get the carbs to work together, you might want to consider an M1 with a 4 hole spacer and a 950. Think you'll gain back some of the bottom end you could loose with the tunnel ram and still pork out more horespower at top end. It's what I ended up with on a 440 I ran years ago that was a little more radical than yours. Just a thought.

 

[72ScampTramp]

http://www.lunatipower.com/Product.aspx?id=2560&gid=317. Here is a link for the cam. Ill try and load the cam card again in the morning.

 

[440dartsport]

475-490hp

 

[72ScampTramp]

cam card

 

[Abodybomber]

Great cam choice!tight lash solids work great with high flow numbers.That cam will be a pussycat on the street,once timing and carbs are sorted out.Shift points gonna be 6000 to 6300,my guess.

 

[moper]

475-490hp

x2

 

[JoeDust451]

I'll say once its jetted/timed it'll go over 500 HP.