75demonduster
Well-Known Member
Does anyone know if there is a book or DVD that tells you how to assemble a mopar small block la step by step and tourqe spec's. I usually have a shop do it but this time I do.
How to?
- Thread starter 75demonduster
- Start date
-
There are quite a few books that have been published over the years including the factory service manuals (which are available in print or dvd). There are also a lot of videos on engine building topics. Read/watch several and bookmark your favorites for future reference. Here are a few I first purchased years ago. I use the web a lot to fix things these days.
75demonduster
Well-Known Member
Thanks
MrJLR
Built, not bought
75demonduster
Well-Known Member
75 duster 408ci the engine was in a swinger ran mid 11's but was dismantled cleaned and checked then i bought it in pieces cus that guy went to chevys. My car is stripped for weight reduction much lighter than his now i want to blow his doors off with his old engine.
4spdragtop
Well-Known Member
Watch for incorrect torque specs posted in books and on the net. Rocker shaft hold down bolts I believe are incorrect in FSM.
Have fun!
Have fun!
He deserves to be a Chevy guy if he builds a 408 that only goes mid 11's, we have stock stroke 360's on here going from deep 11's to mid 10's..........what are the pieces that make up your 408
75demonduster
Well-Known Member
Really. That's what his car pulled. I haven't got that far yet it's all in boxes I'm still trying to get my car ready for the engine with new wiring harness wheel tubs etc. I did get aluminum heads for it and fit tech fuel injection kit
-
Similar threads
