Hurst Competition Plus?

-
7

73Black340

Member
Joined
Oct 30, 2011
Messages
16
Reaction score
1
Location
Portland Maine
My 73 Duster 4 Speed feels a little sloppy and my buddy who works on Mopars said I should replace it with a Comp Plus. After searching Summit and Jegs there is no application for Dusters? I was under the impression that all mopar 4 speeds were the same?
If I cannot use the Mopar Comp Plus what are my alternatives for aftermarket?
 
here it is from summit...i ordered this same one for my 4 speed A-body......

http://www.summitracing.com/parts/HUU-3914076/

pics of my setup...

IMG_2775.jpg


IMG_2774.jpg


IMG_2772.jpg


IMG_2771.jpg
 
It appears your 1st gear stop bolt is much shorter then the standard bolt. I have a problem with the standard bolt hitting trans tunnel in my 72 Duster. Can you recommend a shorter bolt to use.

Thanks
 
sireland67 said:
Where did you buy your linkage from, that looks heaver than my stock linkage.
What handle came with the shifter?
Click to expand...

that linkage/and operating levers is from brewers performance....very nice quality stuff they have...

http://brewersperformance.com/proddetail.asp?prod=LRS-A

no handle came with the shifter...thats just a piece of aluminum i stuck in there...i ended buying an A- body 4 speed shift handle from a member on this site...BUT, you can buy a restored unit from brewers....if you want....mighty expensive, if ya ask me....

http://brewersperformance.com/proddetail.asp?prod=SH740
 
Thanks,
I am very familiar with Wayne at breweres, I buy most my 4-speed stuff from him.
In fact it is so bad he is on speed dial on my phone.
Great company to deal with.
 
Paladin06 said:
It appears your 1st gear stop bolt is much shorter then the standard bolt. I have a problem with the standard bolt hitting trans tunnel in my 72 Duster. Can you recommend a shorter bolt to use.

Thanks
Click to expand...


maybe just shorten the threads on the bolt? is it correctly adjusted once all hooked up onto your trans with the levers in place?
 
In the Sumitt application guide, it states the Competition Plus shifter will not work with a center console...is that corrrect? It seems that with the right handle it would,,, does anyone know for sure?thanks
 
You must log in or register to reply here.
-

Back
Top