hyd roller?

[chrisw21_2000]

who makes a cam for the late 80's roller cam 360s that has a nice rumble to them? I havent really found one that doesnt cost an arm and leg. Sticking this motor in until I get the stroker motor done, but want a decent sound to it. Thanks for the help.

 

[rumblefish360]

Theres no such thing as a cheap roller cam unless it is wiped out and full of dirt and rust. A nice rumbleing cam has a tight centerline. (Numericaly, a low number, 110 and lower.)
Comp cams "Thumper" is supposed to be so designed to "Thump"
http://www.summitracing.com/parts/CCA-20-600-9/
or there retro fit cams that should be used in roller blocks only;
http://www.summitracing.com/parts/CCA-20-812-9/

This Lunati should thump well...as well.
http://www.summitracing.com/parts/LUN-60430/