[WANTED] I have a list

-
Status
Not open for further replies.
Sedanman

Sedanman

67-9 Valiant specialist
Joined
Apr 3, 2009
Messages
8,536
Reaction score
593
Location
chicago Il
Rating - 100%
37   0   0
Contact seller
I'm in need of a 3:54 street gear for a Dana 60 4 series case

4 screws that hold the gas filler tube to floor seal and not all crusty

727 deep trans pan for my 94 conversion van

any resto gasket sets for a 67 2 dr sedan A body with a/c

I have plenty of ads up if you want to swap/trade
 
Sedanman said:
I'm in need of a 3:54 street gear for a Dana 60 4 series case

4 screws that hold the gas filler tube to floor seal and not all crusty

727 deep trans pan for my 94 conversion van

any resto gasket sets for a 67 2 dr sedan A body with a/c

I have plenty of ads up if you want to swap/trade
Click to expand...
ive got the screws for ya
 
I have a few of those,just the screws....I need to dig through a few boxes tomorrow
 
Also need 2 black rear 67 arm rest bases. I have a bunch of fronts to trade.
 
I have a new a/c firewall gasket kit on the way,still need one for the box....eventually
 
Looks like I may have found the gears :). I still need the67 rear arm bases,new 67 fuel tank,3/8 sender. I have lots to trade
 
I am also looking for a 360 car pan std or deep. If deep I need the pick up too. I have 2 milodon pans for 318/340 I can swap. I also need a new 67 a body tank and filler tube seal. I have plenty in the for sale sections if you want to trade.
 
I have the gears,screws. Still need a 360 pan,67 rear arm bases,new 67 fuel tank,rubber bumper kit
 
Any resto leftovers from your 67-72 108" A body. I'm also looking for a stainless brake line kit for 108 wb with 73-up disc's
 
Oh yeah? Can you get me a depth measurement? I want to make sure it's deep enough for my 94 Van. Price? I'm also looking for a B&M 360 flex plate
 
i will be at the shop later on and can get a measurement. i will see about the flexplate. my boss just gave me the go ahead to start selling off all the excess parts, he has 2 garages full of treasure. and he said i have only seen 1/3 of the lot. not alot of a body stuff but tons of motor and trans stuff and lots of B and E body stuff.
 
Cool,keep me posted. I see your old Valiant pop up on the web from time to time.
 
haha yeah unfortunately the guy who bought it from me was a skammer and a flipper and it has been through about 6 owners since me and each guy has done one hack after the next. it's sad i wish i had kept it. i saw your post of your paint job, beautiful!
 
I can always tell that car by the petty blue paint and the seat covers lol. Yeah she is finally getting there the 2nd time at a body shop. I just saw a hemi dart last night and the owner went through the same bs I did but he let it drag out for 7 years. I only let mine drag out for 2. I had to go look at my build thread to see just how long it's been. I'm putting a roller 360 and dana in my V100 so if you run across stuff let me know. I have 3 transmissions to choose from an A999,904 and a 727. I have the engine,tti headers,k frame,discs,wheels,dana most of the body/trim,radiator,manual box. I'm also looking for a manual floor shift column 67-9. Didn't you used to live in FL or CA?
 
long beach ca. i used to live a few blocks from your valiant before the kid you got it from bought it. it was owned by an older guy who had it for a long time. I used to talk to him about it and justins car as often as i could. I used to own justins car and traded it to him. I also went with justin to figure out what was wrong with the engine before you bought it. i am very happy to see it getting the love you are giving it.
 
I've been trying to figure out how to get a hold of the kid I got it from to show him what she looks like now but can't locate him.
 
Status
Not open for further replies.
-

Back
Top