I have a question for POR 15 users

[dibbons]

Does one apply POR15 over the seam sealer on flootboard or go around the sesm sealer? Same question regarding body plugs, go around them or over them with the product? Thank you.

 

[RustyRatRod]

I use Rustoleum instead, but I did not go over body plugs. I did go over the seam sealer, though.

 

[kiss]

i just went around them but I don't think it's a big deal either way

 

[/72Scamp]

I went over seam sealer but took body plugs out until it was dry and then reinstalled new ones

 

[Riddler]

I used foam brushes and went right over seam sealer and body plugs. Great product!

Riddler

 

[roccodart440]

Wear rubber gloves and use a throw away brush.

 

[gardnerjamesw]

X2 over sealer around plugs

 

[Crazy73]

I pulled out the plugs and went over the sealer

 

[RogerRamRod]

I hope it goes without saying, but just in case. If the floor is too week to safely remove the body plugs, POR isn't going to help much.
I wire wheeled first, then used their Metal Prep. Their directions seem kind of vague and contradictory, but like any painting project, it's only as good as what you are putting it on top of.
Wear the gloves for sure.