i hope my duster sounds like this

[moparlover]

i hope she sounds this good when i get her running

[ame="http://www.youtube.com/watch?v=69KC71UNIsI&feature=related"]68 Dodge Coronet Super Bee run - YouTube[/ame]

i dont know but the 400 i'm building will probably sound more like a 383 than a 440 haha

she is getting:
edelbrock bb heads -performer rpm kit comes with intake and cam:
DURATION AS ADVERTISED INTAKE: 300° EXHAUST: 308°
DURATION @ .050 INTAKE: 238° EXHAUST: 246°
LIFT @ CAM (Lobe) INTAKE: 0.32" EXHAUST: 0.33"
LIFT @ VALVE INTAKE: 0.48" EXHAUST: 0.495"
LOBE SEPERATION: 110° INTAKE CENTERLINE: 105° IDLE VACUUM @ 1000 RPM: 10"
harland sharp rockers 1.5 ratio
kb240 pistons / zero deck / 9.4:1 compression .040 gasket
schumacher headers / accurateltd exhaust

 

[AdamR]

Your cam will have some chop to it. The Accurate LTD exhaust will be pretty quite though. The Super Bee sounds like its got open headers

 

[blackbomber]

No tailpipes, and louder from the side would suggest that. Or dumps before the axle, at the least.

What's wrong with quiet exhausts? When I first did the duals on my Duster, and lifted the throttle going downhill with the windows up, I thought it had stalled. When your chambered dual exhaust is quieter than your leak free 1 7/8" stock system, that's pretty bad.

 

[oldkimmer]

.................U can do alot better than that cam...............kim........

 

[K.O. SWINGER]

I love it sounds like my old 292 purple cam.

 

[Purple Haze]

Open headers for sure.