In need of some Throttle Pressure Linkage for 904

-

rick1062

Active Member
Joined
Jun 15, 2014
Messages
44
Reaction score
0
Location
Ventura, CA
Hi Folks,

It looks like I am in need of some TPL linkage. The Barracuda I have been working on is missing the parts from the carb linkage to the bellcrank near the front of the trans.

I took some pictures of the linkage setup I currently have, so... hoping some of you can help me with what I am missing. I have attached a few pics.

The car specifics are: 1965 Barracuda, 273 engine, Carter 2 barrel carb number on casting is 0-0612, 904 trans. If you need more info, please let me know. Also if you have any idea of where I might obtain the missing parts without breaking the bank, please let me know.

Thanks to all as usual,

Rick
Attached Images
 

Attachments

  • 2015-02-26 12.13.16.jpg
    51 KB · Views: 122
  • 2015-02-26 12.13.29.jpg
    56 KB · Views: 94
  • 2015-02-26 12.18.32.jpg
    46.7 KB · Views: 120
Lokar kit

X2.... Unless you want it to be original you may end up paying as much or more for old worn out factory linkage as you would a Lokar cable setup. If you do want to pursue finding factory pieces this isn't the place to post a want ad. Do that in the "parts wanted" forum. A lot of parts flippers scan that section every day but never look in this forum because it's a repair forum
 
Looooooooookkkkaaarrrrrrr. If you want to be special, you could rob the linkage off a 88-95 dakota or ram.
 
-
Back
Top