Looking not to ship any of this so if your in central ky maybe we can deal ,I had a 73 or later 340 engine out of a dart that I rebuilt for my project , these are left over parts,, have original 340 4bbl intake an carter carb , needs rebuilt , have a CAST 340 crank (put a steel crank in my build), bearings did not look spun but condition is unknown , and have the heads off same engine as I used x-heads when I did my build , so condition unknown , one head I took keepers off for one of my x-heads , have the valves an springs but it is apart , being a later 340 the heads are stamped 360 . $300 for all can perhaps help deliver if close or meet up .
.
Also have two 741 center pumkins , NON- sure grip , from my dads old shop and most likely from the 60's or early 70's , but believe there from the 60's , they will need gone thru have been sitting for at least 30 years , inside a shop but they are not freed up , both have the yokes still on them , $125 for both ,
open to trades and offers if its something I need
.
Also have two 741 center pumkins , NON- sure grip , from my dads old shop and most likely from the 60's or early 70's , but believe there from the 60's , they will need gone thru have been sitting for at least 30 years , inside a shop but they are not freed up , both have the yokes still on them , $125 for both ,
open to trades and offers if its something I need
Last edited:
