Interchanging TF-727 Valve Bodies

-
JoJo

JoJo

Well-Known Member
Joined
Sep 26, 2011
Messages
268
Reaction score
28
Location
Southeast GA
I have a transmission that came out of a '72 Dodge D100 laying to the side. I picked up a TF-727 (already installed in vehicle) a few weeks back, but do not know what it come out of. I want to take the valve body from the one I have laying around and install a B&M shift kit. Then, I would swap the stock valve body for the one with the shift kit. Would I run into any problems trying to pull this off?
 
They all interchange from 1966 to about 1990 so it shouldn't be an issue. There's calibration changes due to what car they were disigned for so it may shift a little early or a little late but that will probably be about the worst that would happen.
 
fishy68 said:
They all interchange from 1966 to about 1990 so it shouldn't be an issue. There's calibration changes due to what car they were disigned for so it may shift a little early or a little late but that will probably be about the worst that would happen.
Click to expand...

Thanks for the information. I tried looking it up, but didn't find anything.
 
You must log in or register to reply here.
-

Back
Top