[Found!] J-Head Cores (915 casting number)

[67valiant 100]

Looking for good stock '70-'72 915 J-head cores to play around with and modify. 1.88s (preferred) or 2.02 valves is fine.

Closer to the NY/NJ/PA/CT area the better (within 3-4hrs of NYC), but can also meet up at Carlisle this summer.

Thanks, Charles

 

[pa340dart]

I believe I have a set of 1.88's from a 71 360 sitting on a shelf somewhere?? A valve job was done on them sometime in the 90's
give me a few days to locate them. I'll post pics when I locate them.

 

[pa340dart]

Here we go.
First

 

[pa340dart]

Second head
Check the date codes.
I know they are 71’s

 

[Jim Ward]

Second head
Check the date codes.
I know they are 71’s
View attachment 1716064660

View attachment 1716064661

View attachment 1716064662

Those are 1.88 intake valves. So if they’re 71 they are very late. Early 71 J heads had 2.02 intake valves

 

[MOPAROFFICIAL]

There were many 1971-73 J heads that were 1.88 int valve ...and they were in vans. A ton. 1970 J heads were 2.02.
It's odd that they're missing some digits because that's indicative of a later 78 or 9 head but it does not have those air injection for smog follow the exhaust ports and they clearly have the J and the 360, -F etc..

 

[pa340dart]

I believe they came out of my 71 polara I had in 77 or 78 before I bought my 70 dart - neighbor ran into it took out pass side totaled car kept motor Anyway.it is what they op is looking for IIRC

 

[pa340dart]

Are you still looking?
Any Interest?

 

[67valiant 100]

Are you still looking?
Any Interest?

Hi yes, I sent you a PM back.