Barracuda66
Member
Anyone know a good website to order all the bushings for the K member on a 66 Barracuda? How difficult is it to tear down and rebuild? I have the k member assembly out of the car already.
K Member bushings
- Thread starter Barracuda66
- Start date
-
Bulldozer
free ice cream sandwiches
the K member doesn't use bushings, but the control arms etc. do. they are readily available from many different sources such as PST , rock auto , auto zone, o'reillys etc
upper and lower ball joints
(2 each) upper control arm bushings
lower control arms bushing
strut rods
sway bar bushings and end links (if equipped)
left and right tie rod ends
idler arm
upper and lower ball joints
(2 each) upper control arm bushings
lower control arms bushing
strut rods
sway bar bushings and end links (if equipped)
left and right tie rod ends
idler arm
Classic Industries will have it.
Barracuda66
Member
Right, control arms, etc. I will look around. I'm familiar with Classic (I found they have the whole kit for $159) and have an O'Reilly 2 mins away from my house. Thanks!
-
