my68barracuda
Well-Known Member
Set of two KB 239 1.0MM OS pistons. These 2.2L pistons are sold in a set of 4, I used two sets of 4 to get to the six needed for my slant six build.
These are the two remaining. Two pistons, two piston pins, four piston pin retaining circlips, two complete sets of rings. The top rings are Moly.
The pistons show some tarnish from setting, but they are new never installed.
These KB 239 pistons when used with 'long rods' are an easy way to get to a zero deck with a slant six. For slant six build, I had a very light clean up cut done on the block and head.
The pistons ended up a zero deck, the calculated cranking compression ratio is 10.5 to 1
The 1.0 mm OS on the 2.2L piston equates to a 3.484 bore in a slant six. A nice .084 overbore.
The supplier KB has the pistons in stock, here is a link to the Summit sale page.
KB KB239.1.0MM Keith Black KB Performance Pistons | Summit Racing
$40.00 + shipping for the piston set.
MO or Pay Pal if Pay Pal the buyer pays the fee.
These are the two remaining. Two pistons, two piston pins, four piston pin retaining circlips, two complete sets of rings. The top rings are Moly.
The pistons show some tarnish from setting, but they are new never installed.
These KB 239 pistons when used with 'long rods' are an easy way to get to a zero deck with a slant six. For slant six build, I had a very light clean up cut done on the block and head.
The pistons ended up a zero deck, the calculated cranking compression ratio is 10.5 to 1
The 1.0 mm OS on the 2.2L piston equates to a 3.484 bore in a slant six. A nice .084 overbore.
The supplier KB has the pistons in stock, here is a link to the Summit sale page.
KB KB239.1.0MM Keith Black KB Performance Pistons | Summit Racing
$40.00 + shipping for the piston set.
MO or Pay Pal if Pay Pal the buyer pays the fee.
