Anybody do a 5 speed and had problems bleeding the slave/concentric bearing?? just finshed the install and followed all the directions. bleed the mc/bearing and will not release. need advise. please help O72D
tryed that, i have plenty of peddle and pressure, but i still cant get the clutch to release
the problem with the system. the bleeder is before the concentrict bearing. on the pressure line. any help would be great. thanks O72D
You have the hydraulic slave? I had to use a small syringe to inject hydraulic fluid into the system to get it started and takes a while to get all the air out of the system.