[FOR SALE] Knobs, bezels dash stuff

[4spdragtop]

Hi all, trying to clear out/make space. MOST of this stuff is 67-9 cuda stuff, but double check to make sure. I'll try to post if unknown or not.
Would prefer a bulk buy/deal to clear out quicker.
Also everything plus shipping from Peterborough Ontario. Minimum shipping to US costs about $15.
Thanks
Steve

Glove box locks, both work. Sold KK
1 with screws and latch $15. 1 without $10

Wedge heater control knobs and trim piece #2784066(unknown??). All wedges have set screws $25 for lot. Sold KK

Lighters, some A, the big ones a C maybe $5 each. Socket and 2 holders(3 pcs) $5.

3 knobs and HL stem $10 SOLD KK

Thanks
Steve

 

[4spdragtop]

3 headlight bezels $2 each, $5 all 3. SOLD KK

Very nice wiper knob $10 SOLD SEANDAVID

Barrel nuts $2 all, some have rust but solid, others nice shape.

68 up glovebox cables. $5 each 1 SOLD MOPARMOMZEE, and 1 TO JOSECUDA
1 STILL AVAILABLE

Asst nuts/plastic clips, (2 "spacers" in bottom of pic are for rally dash speedometer) $5

 

[4spdragtop]

W/S linkage bushings, "rear air" bezel, hazard switch or wiper switch bezel, ign cyl bezels(one I think is B, other unknown), antenna bezel(unknown).
$10 lot SOLD PENDING JOSECUDA

6 OEM dash bulb holders unbroken and tested good, star shaped steering column adjuster(I think). 2 black push pins for package tray nice shape.
$8 SOLD PENDING SEANDAVID55

Nice wash knob $20

 

[Seandavid55]

Pm sent on the nice plain wiper knob, dash bulb holders and package tray clips.

Thanks

 

[krazykuda]

PM sent and you said 'knobs"... Heh, heh, heh....

 

[str12-340]

4spdragtop - do any of your wiper knobs have the clip that goes inside the knob to hold it tight to the stem? I would buy either a clip, or a knob with a clip in it, just to get that clip

 

[Mopar Momzee]

Glove box cable please would u happen to have the correct screws.jesse

 

[4spdragtop]

I dont believe they do, there is one that's very difficult to find. Not sure if what you're looking for is 2 spd or not....

4spdragtop - do any of your wiper knobs have the clip that goes inside the knob to hold it tight to the stem? I would buy either a clip, or a knob with a clip in it, just to get that clip

I probably have the screw but not sure what looks like? Got a pic?

Glove box cable please would u happen to have the correct screws.jesse

 

[Mopar Momzee]

I dont believe they do, there is one that's very difficult to find. Not sure if what you're looking for is 2 spd or not....


I probably have the screw but not sure what looks like? Got a pic?

I don’t sorry

 

[str12-340]

I dont believe they do, there is one that's very difficult to find. Not sure if what you're looking for is 2 spd or not....

for a variable speed with washer like one of the knobs you are selling, but that part of the knob is the same for the WASHER and plain knobs.

 

[4spdragtop]

Yeah the "washer" doesnt have an insert/clip sorry.

for a variable speed with washer like one of the knobs you are selling, but that part of the knob is the same for the WASHER and plain knobs.

 

[4spdragtop]

I think I found one with a 2spd switch and plain knob I found. What is the switch # you have? The one I have is 2820525.

for a variable speed with washer like one of the knobs you are selling, but that part of the knob is the same for the WASHER and plain knobs.

 

[str12-340]

I think I found one with a 2spd switch and plain knob I found. What is the switch # you have? The one I have is 2820525.

I'm looking at a variable speed knob and a 2 speed knob next to each other and it's clear that the hole is the same. I'll send a PM

 

[Josecuda]

PM Sent

 

[4spdragtop]

Received, thanks Jose, I'll get it boxed with rest of stuff.

PM Sent

 

[firevike]

Hi all, trying to clear out/make space. MOST of this stuff is 67-9 cuda stuff, but double check to make sure. I'll try to post if unknown or not.
Would prefer a bulk buy/deal to clear out quicker.
Also everything plus shipping from Peterborough Ontario. Minimum shipping to US costs about $15.
Thanks
SteveView attachment 1715859998

Hello, not sure what you have left. I'm looking for a headlight knob and wiper knob for my 68 Dart. Do you have those by chance?
James

Glove box locks, both work. Sold KK
1 with screws and latch $15. 1 without $10View attachment 1715859995

Wedge heater control knobs and trim piece #2784066(unknown??). All wedges have set screws $25 for lot. Sold KK

View attachment 1715860005 View attachment 1715859997

Lighters, some A, the big ones a C maybe $5 each. Socket and 2 holders(3 pcs) $5.View attachment 1715860008

3 knobs and HL stem $10 SOLD KK

View attachment 1715860011

Thanks
Steve

 

[4spdragtop]

Hi James, these are the only ones I have left. Top one is for headlight.
"Wash" is better than it looks. Needs black paint touched up. Has one small zit about 5 o'clock.
$35 shipped for "wash" tracked/insured. I'll throw in the rest N/C.
Thanks
Steve

 

[firevike]

Hi James, these are the only ones I have left. Top one is for headlight.
"Wash" is better than it looks. Needs black paint touched up. Has one small zit about 5 o'clock.
$35 shipped for "wash" tracked/insured. I'll throw in the rest N/C.
Thanks
Steve


View attachment 1715880968

View attachment 1715880969

View attachment 1715880970

Sounds good. I'll take the deal! Pay Pal?

 

[4spdragtop]

Pm coming

Sounds good. I'll take the deal! Pay Pal?