[Found!] LA 360 windage tray with hardware

[SLOPAR72]

The title says it all. I am zipcode 23231 Central Va. Message me if you have this and thanks....

JW

 

[VOETOM]

Have no hardware but I think I have a new OEM tray. If anyone pops on with hardware, you are set!

 

[73 340 duster]

By Hardware..Do you mean the main cap bolts with the bolt holes for windage tray

 

[VOETOM]

Yes Lonnie, you are correct. I have no bolts or studs.

 

[73 340 duster]

Yes Lonnie, you are correct. I have no bolts or studs.

Give me a day or so i got some have to dig thru swap meet boxes

 

[VOETOM]

Lonnie, I am fairly certain mine is a 340 tray, both of them actually. If you can tell me how to tell, i can check them. They have no number on them at all.
Tom

 

[73 340 duster]

The windage try for a 360 bolt holes are wider than a 340 ..The 340 has a smaller main

 

[73 340 duster]

I my have a 360 tray also

 

[JDMopar]

John....make sure to get a 360 windage tray. A 340 tray can be made to bolt on, but the 360 counterweights will scrape on it! I barely escaped that mistake trying to be a cheapskate and dig into my parts stash....lol. I know that you probably already knew that, but wanted to try and save you some trouble....just in case!

 

[73 340 duster]

John....make sure to get a 360 windage tray. A 340 tray can be made to bolt on, but the 360 counterweights will scrape on it! I barely escaped that mistake trying to be a cheapskate and dig into my parts stash....lol. I know that you probably already knew that, but wanted to try and save you some trouble....just in case!

Yup know that because has longer stroke than 340

 

[73 340 duster]

John....make sure to get a 360 windage tray. A 340 tray can be made to bolt on, but the 360 counterweights will scrape on it! I barely escaped that mistake trying to be a cheapskate and dig into my parts stash....lol. I know that you probably already knew that, but wanted to try and save you some trouble....just in case!

Hey i checked dont have the bolts must have sold them but do have a 360 windage tray