Last one to post in this thread wins!

-

JeffisOld said:
Well Geoff may be keeping a 340 in his car but nothing else will be stock by any means Fred!

He will definitely build a butt kickin motor, Dana 60 in the rear. No back seat because the tubs are too big. I've never had a car with a back half. This car was the first fast car he owned back in the day so it's been around ever since. He's also got 2 slant back Barricudas down here in my end of the yard. My wife and I live about 300 yards behind their house. We bought a new single wide mobile home and put up a shop with more square footage than the house.
Click to expand...
I live in a mobile too as we talked about a long time ago. Cheep to keep and trying to be simple.
 
Fred Scigliano said:
I have a friend on this forum that is helping me with my 340 because I am not real good with building HP. but learning.
Click to expand...

You're not alone there. I got all my big block stuff from him. I read alot too so I k ow I'll get it cyphered. I'm going to use a 512 stroker but low compression and reliable!
 
JeffisOld said:
Sorry BP, it doesn't get any easier as we age!
Click to expand...
Ya know... she wasn't special. She wasn't kind. She wasn't mean. She wasn't a great cook nor bad. It was a different time being a young boy. We all just got up in the morning and what happened, happened. When the curfew blew we all went home.
Get up the next morning and what happened, happened. No drama. No instant gratification. We created our fun out of the environment. Maybe it was somebody else's Mom who fed us that day. We were FREE!!!
 
JeffisOld said:
You're not alone there. I got all my big block stuff from him. I read alot too so I k ow I'll get it cyphered. I'm going to use a 512 stroker but low compression and reliable!
Click to expand...
Sounds like fun. I bet your torque is a butt load and I would love to go for a ride when your done. lol
 
With a little luck It will have a GearVendors unit and we might just make it up that way. We do plan to travel in it. I'm putting a 30 inch tire on the back so that should be feasible.
 
Bodyperson said:
Ya know... she wasn't special. She wasn't kind. She wasn't mean. She wasn't a great cook nor bad. It was a different time being a young boy. We all just got up in the morning and what happened, happened. When the curfew blew we all went home.
Get up the next morning and what happened, happened. No drama. No instant gratification. We created our fun out of the environment. Maybe it was somebody else's Mom who fed us that day. We were FREE!!!
Click to expand...
She sounds like my kinda cook. As a kid we all had to create our own fun I think.
 
JeffisOld said:
With a little luck It will have a GearVendors unit and we might just make it up that way. We do plan to travel in it. I'm putting a 30 inch tire on the back so that should be feasible.
Click to expand...
Have you tried the Gear Vendor yet Jeff. I am real happy with mine since I did away with the brain box and hooked it up direct. The only problem is if you don't get it out of overdrive before you go in reverse it will fry the Gear Vendor. Not sure if they improved it in the last year.
 
t
JeffisOld said:
With a little luck It will have a GearVendors unit and we might just make it up that way. We do plan to travel in it. I'm putting a 30 inch tire on the back so that should be feasible.
Click to expand...
Thats a dang tall tire. I'd love to get that tall under my 67 Barracuda. I mini tubbed it and centered the tire in the wheel well. I beat the snot out of any thing I could to gain clearance. Width isn't a problem but I want the tire tucked and above the wheel opening.
 
Fred Scigliano said:
Have you tried the Gear Vendor yet Jeff. I am real happy with mine since I did away with the brain box and hooked it up direct. The only problem is if you don't get it out of overdrive before you go in reverse it will fry the Gear Vendor. Not sure if they improved it in the last year.
Click to expand...
Wished you lived a little closer I would have let you try mine.
 
Bodyperson said:
t

Thats a dang tall tire. I'd love to get that tall under my 67 Barracuda. I mini tubbed it and centered the tire in the wheel well. I beat the snot out of any thing I could to gain clearance. Width isn't a problem but I want the tire tucked and above the wheel opening.
Click to expand...

I'm sure the suspension change helps. I'm running a RMS front and rear.

20171107_171823.jpg


photostudio_1510937168355.jpg
 
Fred Scigliano said:
Have you tried the Gear Vendor yet Jeff. I am real happy with mine since I did away with the brain box and hooked it up direct. The only problem is if you don't get it out of overdrive before you go in reverse it will fry the Gear Vendor. Not sure if they improved it in the last year.
Click to expand...

No sir I have not tried one.

I would love to. I do plan on using the car to travel and if I need to be careful I will. I don't know if I would use it all that often unless I will be doing considerable highway driving. I am fortunate in that my brother has 4 or 5 different gears already set up on 8.75 differential chunks. So I can play a bit without going broke!
 
JeffisOld said:
Boy, that's quite a modern take on a classy car shape.

For some reason I thought you had an E body.


Oops, that's Sublime I am thinking of!
Click to expand...
Understandable. I aint showed much info about my A-body. Soon I hope. She's what we might call... "in disrepair"
 
You must log in or register to reply here.
-

Similar threads

G
  • Locked
[SOLD] NOS Speed Pro/TRW 318 .030 Forged Pistons
Replies
0
Views
293
GTX JOHN
G
RustyRatRod
Here's Yall A Good Laugh.....
2
Replies
30
Views
2K
missing linc
missing linc
Car Nut
I think my license might be in jeopardy…
Replies
4
Views
499
rklein383
rklein383
diymirage
Guess who doesn't have to worry about mice anymore?
Replies
2
Views
461
diymirage
diymirage
Kern Dog
Having fun in the shop
Replies
12
Views
550
missing linc
missing linc
Back
Top Bottom