Leaded seams for 1970 dart ?

-

MOPARMAGA

A-body or nobody
FABO Gold Member
Joined
Aug 20, 2019
Messages
16,301
Reaction score
19,843
Location
Yakima Wa
I'm looking for any other possible leaded seams.
I found the cowl to A pillar & C pillar so far.
I think that was all of them but have not stripped a dart all the way to bare steel.
Thanks in advance.
 

Found the last bit of lead lower rear corner of the doors on the rockers... thanks guys !
 
My '71 also has lead at the connection of the taillight panel to the rear quarter panels. Yours probably does too.
 
My '71 also has lead at the connection of the taillight panel to the rear quarter panels. Yours probably does too.
I have a 70 dart hard top, it doesn't have that cool tail light panel
 
Will probably be some at each lower corner of the rear window where the dutchman panel, the quarter and the sail panel all come together.
 
There’s a seam where the roof and the A pillar come together too. I’ve cleaned them all out on my 70 Duster. If it ever quits raining, I’m going to blast the seams and fill them with Everglass before I epoxy prime the whole thing
 
There’s a seam where the roof and the A pillar come together too. I’ve cleaned them all out on my 70 Duster. If it ever quits raining, I’m going to blast the seams and fill them with Everglass before I epoxy prime the whole thing
Thanks, It's only supposed to quit raining for 4 hours this year lol
 
There’s a seam where the roof and the A pillar come together too. I’ve cleaned them all out on my 70 Duster. If it ever quits raining, I’m going to blast the seams and fill them with Everglass before I epoxy prime the whole thing
I am planning on doing the same.
 
-
Back
Top Bottom