Lens/bezel removal

[mmdoctor]

Guys,

Have a 67 notch and the clear lens/black 4-way divider (see green lines on pic) for my gauges has fallen down and is actually resting on my needles. The clear lens itself is loose in the hole so I'm assuming some sort of tab/screw has broken off the back of the bezel. Also assuming a spacer of some sort is missing that keeps the black divider/lens up off the needles.

My question is how simple this will be to repair?? Never taken apart a dash before and after looking at it extensively, I hope it just involves removing the bezel screws (see red arrows on pic), and then using the special Mopar knob removal tool, and then pull the bezel off. The heater control ends look like they might be an issue to remove though....and the base of the radio knobs?

I tried to take a few pics to help show what's going on. Thanks in advance for the help!

 

[340wedge]

The heater control knobs have little allen screws on the bottom, once they and all the screws are out, including the headlight switch knob, (there is a little push button on the shaft) and windshield wiper knob are removed you can take the dash out. You may need to drop the steering column slightly (Two bolts underneath) and of course remove the plugs behind the gauges that the wiring harness plug into. The lenses have plastic stems that are melted with a soldering iron that hold them on, You can all use a special plastic epoxy type glue.