LH thread wheel studs?

[bigtommy]

where can i find a new set of LH thread wheel studs and lug nuts? and how do you get the old studs off the hub?

 

[moparsegura]

Take the hub off....hammer them out....get right hand studs!!

 

[faster4231]

x 2 on above answer

 

[VDART]

NO!!! if you are replacing the front studs-- do not use The bfh method!!!
rear axle it is ok---, your front hubs are swedged & you will ruin the the hubs, they need to be cut then removed -- or trade/swap someone with a RH hub & you'll be good to go!!
do a search on Swedge lots of info ,Lawrence

 

[Mrkidd]

The guy above is right.....I've tried that just a few months ago and I ruined the hub doing it...and good luck finding another hub....cut the lip off and get some right handed ....the left should be left behind...

 

[damnimcooltom]

If you press the swedged studs out without cutting the "smashed" parts first, it will "hog out" the holes and any future studs will be loose. It may work for a while, but they will be loose, and can eventually spin in place when attempting to tighten or loosen the nuts. I've got a toasted hub laying on my workbench. The tire shop thought they knew better and ruined it.

http://www.sweptline.org/forums/viewtopic.php?f=20&t=21347

http://www.classictrucks.com/tech/0805clt_1967_dodge_truck_brakes_dodgeing_disaster/index1.html

 

[bigtommy]

thank you guys. i got them out.

now i need to find the size of the studs. the passneger side wheel studs are a different then the driver side studs.

 

[flmopars]

i have lug nuts for sale depends on if you need 1/2" or 7/16th