71scamp78
Well-Known Member
Looking to finally buy some lifters for my 5.7 to 6.4 stroker build. Looking at the Hellcat lifters or the Comp Cam lifters. Leaning towards comp does anyone have any input on them.
Lifters?
- Thread starter 71scamp78
- Start date
-
A number of knowledgeable Gen 3 Hemi folks recommend the Johnson Hylift lifters.
The next logical question is which one should you use. I can't answer that question, but maybe some other folks will chime in. To date, the only lifters that I have seen recommended by multiple people are the factory HC lifters and Johnson Hylift. Some swear by the HC lifters. I am just a little leery about any factory lifter given all the issues over the years.
This is a good thread that mentions the Comp, Johnson Hylift and Johnson lifters. There are also good sub-threads within this thread.
Johnson Hylift with Direct Shot oiling - B-2335SE (16)
Crower EDM axle oiling – 66323PH-16
Isky HPx lifters - 3577-HYRT (needle bearing) - 3575-HYRT (bushing)
Johnson Lifters with axle oiling - #2356
- BEST PRICE ON LIFTERS
- http://toplineauto.com/wp-content/uploads/2019/04/Lifter-Application-Catalog.pdf
- High Performance Hydraulic Roller Lifters Mopar Hemi 5.7L & 6.1L with Edm - Lifters
- https://www.iskycams.com/downloads/GenIIIFlyer.pdf
The next logical question is which one should you use. I can't answer that question, but maybe some other folks will chime in. To date, the only lifters that I have seen recommended by multiple people are the factory HC lifters and Johnson Hylift. Some swear by the HC lifters. I am just a little leery about any factory lifter given all the issues over the years.
This is a good thread that mentions the Comp, Johnson Hylift and Johnson lifters. There are also good sub-threads within this thread.
Johnson Hylift with Direct Shot oiling - B-2335SE (16)
Crower EDM axle oiling – 66323PH-16
Isky HPx lifters - 3577-HYRT (needle bearing) - 3575-HYRT (bushing)
Johnson Lifters with axle oiling - #2356
-
