[WANTED] Looking for aluminum driver side door peak molding and rear bumper back up light assembly for dart.

[67Abody]

Hello,

Looking for a 66 - 67 dart chrome rear bumper back up light assembly with good chrome on bezel that shows through on face of bumper.

Also an aluminum driver door peak molding (not belt molding against glass) PN# 2807646-7 Very nice used or N.O.S. thanks. (Passenger side may be the same but not sure).

Thank you for any help.

 

[Dana67Dart]

Just for clarity.

These are the parts you are looking for?

 

[67Abody]

Just for clarity.

These are the parts you are looking for?

View attachment 1716468413View attachment 1716468414

yes, Perfect. Correct on the door molding and back up lights. I could also use a nice set of seat back medallions for the bucket seats as well shown in last picture. Do you have these available? thx.

 

[Dana67Dart]

. Do you have these available?

I don't have anything just wanted to help you with your search

 

[67Abody]

Oh Okay, thank you
I was able to find b'ups but still need the driver door aluminum peak molding and two seat medallions. thx

Thanks so much for any help you can give.

 

[Bennoel 10]

yes, Perfect. Correct on the door molding and back up lights. I could also use a nice set of seat back medallions for the bucket seats as well shown in last picture. Do you have these available? thx.

Are these what you need ??

 

[67Abody]

Are these what you need ??

View attachment 1716469648

View attachment 1716469649

View attachment 1716469650

Yes! Exactly what I need for the backs of both of my Bucket seats. Have my seat kit but have been waiting to find these to have sewn into material. Thank you

 

[67Abody]

Are these what you need ??

View attachment 1716469648

View attachment 1716469649

View attachment 1716469650

Also need the flat metal backing plates for both.

 

[67Abody]

Are these what you need ??

View attachment 1716469648

View attachment 1716469649

View attachment 1716469650

Nice one's with no pitting and nice chrome.

 

[Bennoel 10]

Also need the flat metal backing plates for both.

I believe the "backing plates" are still there. I only need the seat frame and am willing to part with the medallions including "backing plates ". As for condition they look almost perfect to me. I can take any pics necessary. DM me if you want to proceed.
Thank you

 

[Dana67Dart]

When removing the rear plates bend the teeth up or you will break off the posts. If the teeth break off you can use a speed nut to sandwich the rear plate to the Upholstery

 

[Bennoel 10]

When removing the rear plates bend the teeth up or you will break off the posts. If the teeth break off you can use a speed nut to sandwich the rear plate to the Upholstery

Haven't laid eyes on the rear plates yet. The burlap cloth is obstructing an inspection ? I'm confident they're present.
Thanks for the heads-up.

 

[67Abody]

I believe the "backing plates" are still there. I only need the seat frame and am willing to part with the medallions including "backing plates ". As for condition they look almost perfect to me. I can take any pics necessary. DM me if you want to proceed.
Thank you

That's great if the medallions are in good shape with the backing plates. I have seen some people razor blade out the complete section from the old seats. If you do that it will save you time and I can take it from there. Yes I would like to proceed to acquire them. Let me know the cost and payment method. thank you for your help.

 

[67Abody]

When removing the rear plates bend the teeth up or you will break off the posts. If the teeth break off you can use a speed nut to sandwich the rear plate to the Upholstery

Thank you for your help!

 

[Bennoel 10]

Gonna DM yah

 

[67Abody]

Gonna DM yah

Okay.