looking for an interior to fit a '68 Bcuda Notchback

-
burrpenick

burrpenick

'69 Barracuda
Joined
Jan 16, 2008
Messages
449
Reaction score
63
Location
Florida/NC
Someone mentioned a Sebring convertible.........they have 17 of them at my local UPULL and those front seats have built in belts. How well would that set up fit in the '68?
 
I have no idea but start with a poopload of measurements. Of course, expect some fabrication work (ex. seat tracks and/or floorpans, trans tunnel, etc). GL.
 
burrpenick said:
Someone mentioned a Sebring convertible.........they have 17 of them at my local UPULL and those front seats have built in belts. How well would that set up fit in the '68?
Click to expand...

The sebring seats are the same size as the factory bucket seats. They fit very well in 68 cuda . Just a little frame mounting work and you have a seat with power and a shoulder harness too. Use the later model seats as they don't require a separate part to activate the shoulder harness lock up... a search on the internet will provide more info
 
You must log in or register to reply here.
-

Back
Top