Looking for these bolts.

VonCramp · Feb 25, 2013

I am looking for the bolts that attach the lower ball joint to the spindle for the Duster Disc brakes I am installing on my 69 Cuda. Thanks.

SGBARRACUDA · Feb 25, 2013

Are these for the Kelsey Hayes early disc brakes?

VonCramp · Feb 25, 2013

The later big pattern brakes

SGBARRACUDA · Feb 25, 2013

Just go to nut and bolt supply and by some grade 8, 5/8 x 3" bolts and nyloc nuts.

Oklacarcollecto · Feb 25, 2013

SGBARRACUDA said:
Just go to nut and bolt supply and by some grade 8, 5/8 x 3" bolts and nyloc nuts.

Are the OEM bolts fine thread for this application?

SGBARRACUDA · Feb 25, 2013

Oklacarcollecto said:
Are the OEM bolts fine thread for this application?

Yes they are. I had a pair of spindles in the garage that I took the measurements off of.

Oklacarcollecto · Feb 25, 2013

SGBARRACUDA said:
Yes they are. I had a pair of spindles in the garage that I took the measurements off of.

That is what I was thinking but some times the only thing I am sure about is that my memory is as good as it used to be.

VonCramp · Feb 25, 2013

Thanks guys for the speedy replies! I will buy the new bolts as suggested!